https://doi.org/10.1051/epjconf/20122501072
Investigation into flow boiling heat transfer in a minichannel with enhanced heating surface
Kielce University of Technology, Faculty of Mechatronics and Machine Building, Chair of
Mechanics, al. 1000-lecia P.P.7, 25-314 Poland
email: tmpmj@tu.kielce.pl
The paper presents results of flow boiling in a minichannel of 1.0 mm depth. The heating element for the working fluid (FC-72) that flows along the minichannel is a single-sided enhanced alloy foil made from Haynes-230. Microrecesses were formed on the selected area of the heating foil by laser technology. The observations of the flow structure were carried out through a piece of glass. Simultaneously, owing to the liquid crystal layer placed on the opposite side of the enhanced foil surface, it was possible to measure temperature distribution on the heating wall through another piece of glass. The experimental research has been focused on the transition from single phase forced convection to nucleate boiling, i.e. the zone of boiling incipience and further development of boiling. The objective of the paper is determining of the void fraction for some cross-sections of selected images for increasing heat fluxes supplied to the heating surface. The flow structure photos were processed in Corel graphics software and binarized. The analysis of phase volumes was developed in Techystem Globe software.
© Owned by the authors, published by EDP Sciences, 2012