https://doi.org/10.1051/epjconf/20146702080
Influence of volume working fluid and ambient temperature on cooling efficiency of loop thermosyphon
University of Žilina, Department of Power Engineering, Univerzitná 1, 01026, Žilina, Slovakia
a Corresponding author: patrik.nemce@fstroj.uniza.sk
Published online: 25 March 2014
Article deal with research of device for electrical component cooling used to heat transfer working fluid phase change. Amount of heat flux transferred by thermosyphon loop depend from amount working fluid and from ambient temperature where is heat removal too. In article is described proposal construction of thermosyphon loop, comparisons of his cooling efficiency if is filled 40 % and 50 % volume of working fluid and condenser (ambient) temperature from 20, 30 up to 40 °C at heat load from 40 to 360 W.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.