https://doi.org/10.1051/epjconf/20146702101
Characterization of the cavitating flow in converging-diverging nozzle based on experimental investigations
Brno University of Technology, Faculty of Mechanical Engineering, V. Kaplan Department of Fluids Engineering, Technická 2896/2, 61669 Brno, Czech Republic
a Corresponding author: rudolf@fme.vutbr.cz
Published online: 25 March 2014
Cavitation phenomena occuring in converging-diverging nozzle (Venturi tube) are described in the paper. A closed test circuit with possibility to control both flow rate and static pressure level were used. Loss coefficient was evaluated for different sigma numbers resulting in full „static“ characterization of the nozzle. Visualizations of the cavitation pattern development were acquired and matched with evolution of the loss coefficient. Three cavitation regimes are described: partial cavitation, fully developed cavitation, supercavitation.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.