https://doi.org/10.1051/epjconf/20159402003
Effects of grain size on the spallation behavior of pure copper under plate-impact loading
1 Key Laboratory of Impact and Safety Engineering, Ministry of Education of China, Ningbo University, Zhejiang 315211, People's Republic of China
2 Key Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, People's Republic of China
a Corresponding author: wangyonggang@nbu.edu.cn
Published online: 7 September 2015
The effects of grain size on the dynamic tensile fracture (or spall) response were investigated for high purity copper materials by plate-impact experiments. The spall strength estimated from the free surface velocity profile is nearly constant with no significant effect from the grain size. However, differences are observed in the acceleration rate of velocity rebound beyond the minima. This may be attributed to the effect of grain size on the growth rate of damage. Metallographic analyses of the fracture surface show that the characteristic feature of the fracture surface clearly depends on the grain size. In the smaller samples, the fracture surfaces are decorated with large, high-density ductile dimples suggesting that the preferential failure mode is ductile intergranular fracture. In the larger samples, the fracture surfaces have a rock candy appearance with small, brittle, high density dimples as well as large ductile dimples suggesting that the fracture mode is a mix of both brittle intergranular fracture and ductile transgranular fracture.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
