https://doi.org/10.1051/epjconf/20159404057
Analysis on formulas of concrete plate under contact explosion
Institute of Applied Physics and Computational Mathematics, Beijing 100094, China
a Corresponding author: gly_w@sina.com
Published online: 7 September 2015
Based on many test data of concrete plates of several thicknesses, this paper presents some new simple engineering formulas for computing critical thickness of scabbing and perforation, the front explosion diameter and the rear scabbing diameter of reinforced concrete plates under contact explosion. For the damage problem of a 20 cm thick concrete target under contact explosion of 1.25 kg TNT charge, the paper gives the numerical simulation results of LS-DYNA software for comparison. The damage zone of concrete plate in numerical simulation is determined by analysis of tension pressure resulted from shock wave reflection on the free boundary. And the numerical simulation results are in basic agreement on the results of these engineering formulas.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
