Dynamic behavior and failure of the base and heat affected materials of a HSS fillet welded joint
1 Université de Valenciennes, LAMIH CNRS 8201, Le Mont-Houy, CISIT, 59313 Valenciennes Cedex 9, France
2 Nexter Systems, 11 allée des Marronniers, 78022 Versailles, France
a Corresponding author: firstname.lastname@example.org
Published online: 7 September 2015
Welded joints, due to their manufacturing process, are commonly weakened areas. This study analyses the dynamic behavior of the Base Metal (BM) and the Heat-Affected Zone (HAZ) materials of a HSS (High Strength Steel) fillet welded joint. First, a specific approach is developed to generate the HAZ material using a thermal treatment. Hardness and grain size are used to validate the replicated HAZ. This approach appears efficient and repeatable. Secondly, the true stress-strain quasi-static and dynamic behaviors up to failure of the BM and the HAZ are determined. This characterization is performed thanks to video tracking procedure and Bridgman-LeRoy correction. The comparison between these two materials shows that the thermal field of the welding process increases the HAZ yield stress and hardening while decreasing the strain at failure. It appears that the base metal is not rate sensitive from quasi-static up to 1350 s−1. On the contrary, the heat affected material appears to be rate sensitive but by softening. This unexpected dynamic material softening requires further analyses.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.