https://doi.org/10.1051/epjconf/201611402054
Influence of recirculation on Y-Q characteristic curve of hydrodynamic pump
Brno University of Technology, Faculty of Mechanical Engineering, Victor Kaplan Department of Fluids Engineering, Technická 2, 61669 Brno, Czech Republic
a Corresponding author: klas@fme.vutbr.cz
Published online: 28 March 2016
Contribution is focused on discussion of different design modifications of the volute, impeller and rotor-stator cavity in case of very low specific speed pump with recirculation channels. Amount of the liquid flowing through the recirculation channels has significant effect on delivery height, stability of the head curve and hydraulic efficiency. Analysis of these effects is based on the evaluation of the dissipated power in different internal parts of the pump and for different flow rates. It has already been proved in our previous research that volute has substantial impact on stability of the head curve. It is apparent that similar effect can also be attributed to distribution and shape of the recirculation channels. This fact is connected with the inflow into the channels and with magnitude of the flow rate through the recirculation channels. Influence of mentioned parameters on recirculation is discussed in present paper.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.