https://doi.org/10.1051/epjconf/201611402137
Droplet Measurement below Single-Layer Grid Fill
CTU in Prague, Department of Fluid Dynamics and Thermodynamics, 166 07 Prague, Czech Republic
a Corresponding author: pavol.vitkovic@fs.cvut.cz
Published online: 28 March 2016
The main part of the heat transfer in a cooling tower is in a fill zone. This one is consist of a cooling fill. For the cooling tower is used a film fill or grid fill or splash fill in the generally. The grid fill has lower heat transfer performance like film fill usually. But their advantage is high resistance to blockage of the fill. The grid fill is consisted with independent layers made from plastic usually. The layers consist of several bars connected to the different shapes. For experiment was used the rhombus shape. The drops diameter was measured above and below the Grid fill.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
