The LED Beacon prototype system for the on-shore time calibration of the KM3NeT-IT Towers
1 Dipartimento di Fisica, Università degli Studi di Roma “Sapienza”, Italy
2 Istituto Nazionale di Fisica Nucleare, Sezione di Roma, Italy
a e-mail: email@example.com
Published online: 11 April 2016
The first implementation of the KM3NeT-IT neutrino telescope consists in the installation of 24 Strings and 8 Towers. Focusing on the Towers, the idea behind this work is to exploit the LED sources mounted in the OMs to develop a complementary system, on shore and before the deployment, for the determination of time delays, aiming at the characterizations of the time response of the different elements of the detector. During the assembling of the first tower, a set of measurements has been carried out; the test set-up and the measurement procedure are described, together with preliminary results of the calibration system. Lesson learnt is quite encouraging: uncertainties of the order of 400 ps are reached with very few cautions taken during the short calibration session, and with large room for improvement, making this system feasible and effective for the KM3NeT-IT experiment.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.