https://doi.org/10.1051/epjconf/201611925020
Experimental Determination of Dual-Wavelength Mie Lidar Geometric form Factor Combining Side-Scatter and Back-Scatter Signals
Key laboratory of Atmospheric Composition and Optical Radiation, Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei, Anhui, 230031 China
* Email: zzwang@aiofm.ac.cn
Published online: 7 June 2016
In theory, lidar overlap factor can be derived from the difference between the particle backscatter coefficient retrieved from lidar elastic signal without overlap correction and the actual particle backscatter coefficient, which can be obtained by other measured techniques. The side-scatter signal using a CCD camera is testified to be a powerful tool to detect the particle backscatter coefficient in near ground layer during night time. In experiment, by combining side-scatter and backscatter signals the geometric form factor for vertically-pointing Mie lidar in 532 nm channel is determined successfully, which is corrected by an iteration algorithm combining the retrieved particle backscatter coefficient using CCD sidescatter method and Fernald method. In this study, the method will be expanded to 1064 nm channel in dual-wavelength Mie lidar during routine campaigns. The experimental results in different atmosphere conditions demonstrated that the method present in this study is available in practice.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.