The impact of cooling methods on the maximum temperature of the processed object during side milling
Kielce University of Technology, Department of Manufacturing Engineering and Metrology, Aleja Tysiąclecia Państwa Polskiego 7 ; 25-314 Kielce ; Poland
* Corresponding author: firstname.lastname@example.org
Published online: 12 May 2017
This article presents the changes in temperature distribution concerning the processed object during side milling. The analysis included the influence of selected cooling methods (cold air from vortex tube, cooling with compressed air, and without cooling) on the maximum temperature of the processed object during the process of milling. Measurement of the maximum temperature was conducted with the use of thermocouples and a thermal camera.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.