https://doi.org/10.1051/epjconf/201818002027
Experimental verification of the properties of pneumatic elements
VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Hydrodynamics and Hydraulic Equipment, 17. listopadu 15/2172, Ostrava 70833, Czech Republic
a Corresponding author: kamil.fojtasek@vsb.cz
Published online: 4 June 2018
The subject of this article is experimental verification of properties of pneumatic elements. These elements have been a part of equipment for measuring of rotary air motors parameters. When comparing the measured data with the mathematical model, there were slight variations. The main objective is to verify the correct functioning of these pneumatic elements, comparing the measured results with theoretical data from the catalogs of manufacturers and determine their potential impact on the entire measuring system.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
