https://doi.org/10.1051/epjconf/201818002070
The computational study in the unloading slot of the control valve
1
Doosan Skoda Power, Experimental Research of Flow, Tylova 1/57, Pilsen, Czech Republic
2
University of West Bohemia, Department of Power System Engineering, Univerzitni 8, Pilsen, 306 14, Czech Republic
3
University of West Bohemia, Department of Mechanics, Univerzitni 8, Pilsen, 306 14, Czech Republic
4
University of West Bohemia, NTIS – New Technologies for the Information Society, Univerzitni 8, Pilsen, 306 14, Czech Republic
* Corresponding author: lukas.mrozek@doosan.com
Published online: 4 June 2018
The flow in the unloading system of the control valve is modelled using the numerical simulation. The proportional flow values for various widths of the slot and openings are evaluated. The changes of the pressure and Mach number in the space of the valve are recorded for the selected pressure ratios. The influence of the length of the slot on the mass flow changes is assessed. The results are compared with the experimental findings.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).