Numerical simulation of minor losses coefficient on the example of elbows
UTP University of Science and Technology, Faculty of Mechanical Engineering, Poland
* Corresponding author: firstname.lastname@example.org
Published online: 4 June 2018
Determining of minor losses coefficient is very complicated problem. Analytical methods are often very difficult and experimental methods are very expensive and time-consuming. Consequently, the use of numerical methods seems to be a good solution, but there are no publications describing this issue. Therefore, the paper is describing the numerical method of determining the minor loss coefficient ξ on the example of elbows with circular cross-section.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).