https://doi.org/10.1051/epjconf/201920411001
Calculation of field of spectrometric magnet with 0.13 m gap
Joint Institute for Nuclear Research, Dubna, Moscow region, Russia
* e-mail: yudin@jinr.ru
Published online: 3 April 2019
The spectrometric magnet is widely used in experiments on highenergy physics and a number of other fields. In this report, we present the results of calculating the magnetic field for a variant of a magnet with an interpolar gap of 0.13 m. Our spectrometer magnet has external dimensions of 2.95 x 2.12 x 1.62 m and an aperture (occupied by the beam) of 0.30 x 0.13 m. The simulation was carried out using an integral method of magnetostatics. The results of the calculated field distribution of the analyzing magnet with interpolar 0.13 m gap are given. The calculation was performed for the volume 0.33 x 0.0645 x 1.5 m, the volume of overlapping dimensions. The calculation of the spatial distribution of the three components of the magnetic field of the magnet described in the work is performed to obtain the information about the magnitude and uniformity of the magnetic field for different modes of operation of the spectrometer. The obtained results are planned for using in the processing of physical data.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.