https://doi.org/10.1051/epjconf/201921302019
Comparison and Mathematical Modelling of Leakage Tests
VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Hydrodynamics and Hydraulic Equipment, 17. listopadu 15/2172, Ostrava 70833, Czech Republic
a Corresponding author: kamil.fojtasek@vsb.cz
Published online: 28 June 2019
Leak tests are used in many industrial applications, a typical example are the headlights of cars. In these tests are use different principles and different working media. The monitored parameters are usually the amount of leakage media depending on the pressure drop and the time at which the leakage occurs. The article describes the possibility of performing leak tests using compressed air, their comparison and the subsequent creation of mathematical models.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
