https://doi.org/10.1051/epjconf/202124702011
IMPROVEMENT OF SCALE-XSProc MULTIGROUP CROSS SECTION PROCESSING BASED ON THE CENTRM POINTWISE SLOWING DOWN CALCULATION
Oak Ridge National Laboratory 1 Bethel Valley Road, Oak Ridge, TN 37831, USA
kimk1@ornl.gov
holcombam@ornl.gov
bostelmannf@ornl.gov
wiardada@ornl.gov
wieselquiswa@ornl.gov
Published online: 22 February 2021
The SCALE-XSProc multigroup (MG) cross section processing procedure based on the CENTRM pointwise slowing down calculation is the primary procedure to process problem-dependent self-shielded MG cross sections and scattering matrices for neutron transport calculations. This procedure supports various cell-based geometries including slab, 1-D cylindrical, 1-D spherical and 2-D rectangular configurations and doubly heterogeneous particulate fuels. Recently, this procedure has been significantly improved to be applied to any advanced reactor analysis covering thermal and fast reactor systems, and to be comparable to continuous energy (CE) Monte Carlo calculations. Some reactivity bias and reaction rate differences have been observed compared with CE Monte Carlo calculations, and several areas for improvement have been identified in the SCALE-XSProc MG cross section processing: (1) resonance self-shielding calculations within the unresolved resonance range, (2) 10 eV thermal cut-off energy for the free gas model, (3) on-the-fly adjustments to the thermal scattering matrix, (4) normalization of the pointwise neutron flux, and (5) fine MG energy structure. This procedure ensures very accurate MG cross section processing for high-fidelity deterministic reactor physics analysis for various advanced reactor systems.
Key words: SCALE-XSProc / multigroup cross section processing / slowing down calculation
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.