https://doi.org/10.1051/epjconf/202124902012
Sample preparation of dense granular materials Influence of void ratio e and coordination number Z* on the mechanical behaviour at failure
Univ. Grenoble Alpes, Grenoble INP Institute of Engineering, CNRS, 3SR, F-38000, Grenoble, France
* e-mail: shah.nawaz@3sr-grenoble.fr
** e-mail: gael.combe@grenoble-inp.fr
Published online: 7 June 2021
This paper presents a Discrete Element Method (DEM) study of assemblies of 5041 frictional discs, with periodic boundary conditions and confined by an external isotropic load. In order to generate samples with different internal state variables like the void ratio and coordination number, we present two different numerical procedures. The first technique, which has been widely used in the literature for many years, consists in controlling the coefficient of friction between particles to adjust the density of the samples, which directly influences the coordination number. The second technique is inspired by the previous one but adds an extra step of dynamic mixing with intergranular contacts lubrication. This makes it possible to control quasi independently the void ratio and the coordination number in the case of dense samples. These two types of samples are subjected to simple shear to analyse the influence of the sample preparation procedure on their macroscopic mechanical behaviour.
A video is available at https://doi.org/10.48448/6g28-7j66
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
