https://doi.org/10.1051/epjconf/202125001002
A Laboratory-Scale Instrumented Forging Hammer as an Intermediate Strain Rate Testing Device
1
Department of Mechanics and Industrial Production, Mondragon Unibertsitatea, Loramendi 4, 20500 Mondragon, Spain
2
IKERBASQUE, Basque Foundation for Science, Bilbao, Spain
* Corresponding author: jagirreb@mondragon.edu
Published online: 9 September 2021
Mechanical characterisation of metallic materials at intermediate strain rates is essential to calibrate and validate computational models for industrial applications such as high-speed forming processes i.e. hammer forging, blanking, forming, etc. The most common devices that perform medium to high loading rate experiments are the servo-hydraulic universal testing machines and Split Hopkinson bar systems. Here we analyse the possibility of employing an in-house designed and constructed DirectImpact Drop Hammer (DIDH) for material mechanical characterisation at medium strain rates, ranging from 100 to 300 s-1. To show the suitability of the DIDH for mechanical characterisation, uniaxial compression experiments on S235JR structural steel are conducted and compared with finite element (FE) simulations performed with an elasticthermoviscoplastic material model previously calibrated with Split Hopkinson Pressure Bar (SHPB) tests.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
