https://doi.org/10.1051/epjconf/202125503002
Experimental results from face and lateral fine grinding of fused silica and BK7 using metal and resin bonded tools
Ernst-Abbe University of Applied Sciences Jena, Carl-Zeiss-Promenade 2, 07745 Jena, Germany
* Corresponding author: christian.schulze@eah-jena.de
Published online: 18 November 2021
The experimental setup shall compare face grinding with lateral grinding in a single processing step using fused silica and BK7 as materials. Resin and metal bonded tools are used in face and lateral grinding strategies. The paper presents the results in order to deepen the knowledge about those grinding technologies and to further improve the properties of fabricated components. Furthermore, the results confirm, that ultra-fine grinding is a technology, which can be used to process inorganic non-metallic materials with high quality surfaces with a low roughness and high flatness in a low processing time.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
