High-Speed Temperature Measurement
Brno University of Technology, Department of Thermodynamics and Environmental Engineering, 616 69 Brno, Czechia
* Corresponding author: firstname.lastname@example.org
Published online: 11 July 2022
In certain applications where temperature changes rapidly, e.g., compressor cylinder or explosion chamber, it is necessary to obtain temperature data with a sample rate high enough to register the change, i.e., the temperature probe response time must be very low. Type E coaxial thermocouples with response time in the range of µs can be an example of such a temperature probe. This paper describes several approaches for high-frequency temperature data obtained using coaxial thermocouples. Individual approaches are described together, as well as their shortcomings. Furthermore, the possible method of data evaluation is discussed.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.