https://doi.org/10.1051/epjconf/202226401042
Pressure losses reduction in a steam turbine compact valve
1
Doosan Skoda Power s.r.o., Tylova 1/57, 301 28 Pilsen, Czech Republic
2
University of West Bohemia, Power System Engineering Department, Univerzitni 8, 306 14 Pilsen, Czech Republic
3
Institute of Thermomechanics of the Czech Academy of Sciences, Dolejskova 1402/5, 182 00 Praha 8, Czech Republic
* Corresponding author: vaclav.slama@doosan.com
Published online: 11 July 2022
Valves are integral parts of modern steam turbines. They provide flexible operations and fast load changes which have become more often due to the increasing share of renewable energy. Along with this, the low pressure loss is required for guaranteed operation conditions. This paper is concerned with investigation of pressure losses in the compact valve, which is used as a valve for the intermediate-pressure turbine part, and its geometry modification to lower overall pressure losses. The investigation is based on results of numerical simulations which were carried out in the Doosan Skoda Power Company using a package of ANSYS software tools. Source of increased pressure losses in the compact valve is identified and a way of its reduction is proposed based on the comparison of the current results with data from a typical control valve model. Data analysis is provided in the paper.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.