Experimental and numerical simulation of the wall-pressure fluctuation on the isolated helicopter fuselage
Researcher, Aerodynamics Department, 420111 K. Marx street 10, Kazan, Russia
* Corresponding author: firstname.lastname@example.org
Published online: 24 October 2022
This work is devoted to wall-pressure fluctuation analysis. The object of investigation was an isolated helicopter fuselage. Investigation was carried out by experimental and numerical methods. Numerical simulation was based on RANS and DES approaches. The experiment was carried out in a lowspeed wind tunnel with an open test section. Wall-pressure fluctuation was measurement by high-frequency pressure probes ENDEVCO 8510B-2. The experimental results were compared with both DES data and results by the semi-empirical model based on the RANS simulation. It was shown that DES modelling provides a wall-pressure spectrum for low and middle-frequency parts. For simulation high-frequency part of the spectrum, the semi-empirical model is preferable.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.