https://doi.org/10.1051/epjconf/202226901068
Mathematical simulation of the high capacity pumping system for emergencies
1 VŠB-TU Ostrava, Faculty of Mechanical Engineering, Department of Hydromechanics and Hydraulic Equipment, 17.listopadu 2172/15, Ostrava-Poruba 70800, Czech Republic
2 VŠB-TU Ostrava, Faculty of Safety Engineering, Department of Civil Protection, Lumírova 630/13, Ostrava-Výškovice 70030, Czech Republic
* Corresponding author: martin.vrabel.st@vsb.cz
Published online: 24 October 2022
The article deals with the possibilities of mathematical simulation of the high-capacity pumping module used in emergencies, such as floods and fires. These situations can be broad and varied. In order to respond to these events effectively, formulation of methodology followed with simulation of various scenarios can be very helpful. Based on the high-capacity pumping module MČS-25-330-K produced by Sigma company, and the related certified methodology for its application in the field, mathematical simulations of the system were carried out in MATLAB Simulink. The discharge pressure, flow rate and the pressure loss through straight fire hoses were evaluated for various operational conditions of the pump and partly compared with the field measurement.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
