https://doi.org/10.1051/epjconf/202429901037
Modelling humid air flow condensation in a linear blade cascade
1 University of West Bohemia, Power System Engineering Department, Univerzitni 8, 306 14 Pilsen, Czech Republic
2 Doosan Skoda Power s.r.o., Tylova 1/57, 301 28 Pilsen, Czech Republic
3 NUM solution s.r.o., U Pergamenky 1145/12, 170 00 Prague 7, Czech Republic
* Corresponding author: vaclav.slama@doosan.com
Published online: 4 July 2024
Experimental test rigs such as linear blade cascades often use ambient humid air for internal aerodynamics investigation. However, experimental evidence of flow condensation can be found at higher Mach numbers, especially for lower inlet air temperatures. This paper presents a simple analytical model of the distribution of relative humidity of an air-water mixture and specific mass of condensed vapor as a function of Mach number. Moreover, based on the experimental data, a case study of the transonic flow in a linear blade cascade is performed using ANSYS CFX. The agreement between both approaches is more than satisfactory, leading to further investigations as little is known about the effect of humidity and flow condensation on the flow field.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
