https://doi.org/10.1051/epjconf/202531806003
Optimizing screw shredder rotations for efficient shrubby tree branch processing
1 Tashkent State Transport University, 1, Street Odilkhojayev, Tashkent, 100060, Uzbekistan
2 National Research University “Tashkent Institute of Irrigation and Agricultural Mechanization Engineers”, 39, Street Kari Niyaziy, Tashkent, 100000, Uzbekistan
3 Termez State University, 43, Barkamol avlod str., 190111, Termiz, Uzbekistan
* Corresponding author: jonibekulashov5555@gmail.com
Published online: 17 February 2025
The volume of trees and branches grown in Uzbekistan is increasing year by year. Foreign experiences on processing and use of antlers are analyzed. According to the analysis, it became known that in recent years the volume of bushy tree branches in our republic has increased by 2-3 times, and there is a need to prepare and use various products from the branches. Taking this into account, in our country, creation of the bushy tree branch crushing apparatus, one of the crucial jobs is the construction plan and the technological work method. Based on this, the number of rotations of the screw of the crushing device was studied. Researches were carried out by changing the number of revolutions of the screw or auger of the grinding machine from 800 r/min to 1200 r/min. When the number of revolutions of the grinding screw is 1000 r/min, the amount of small fractions in the content of crushed branches and the smallest amount of indestructibility was achieved, and it was found that the quality of crushing branches has an acceptable value.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
