https://doi.org/10.1051/epjconf/202532313001
Accuracy and reproducibility of ambient topographies at the nanoscale by AFM: Several months of metrological monitoring
1 Normandie Univ, Unicaen, Ensicaen, CNRS, Crismat UMR6508, 14000 Caen, France
2 Murata Integrated Passive Solutions, 2 rue de la Girafe, 14000 Caen, France
* Corresponding author: ziad.gharibeh@murata.com
Published online: 7 April 2025
With the high integration of microelectronic devices, nanoscale surface characterization is critical to process development. The widely used atomic force microscopy provides 2D characterization of the surface at the nanoscale. In this paper, a statistical study of the topographic mode PeakForce Tapping mode is performed. A silicon calibration sample with structures of 20 nm, is characterized, and from 28 days of measurements at the same location, data processing and analysis is proposed to determine the reproducibility of the height measured by AFM. From the section analysis, an uncertainty of 0.26 nm in air is determined. Statistical analysis is also used, and the mode is applied to characterize a dielectric material on the top of a highly integrated capacitor.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
