Status of HiLASE project: High average power pulsed DPSSL systems for research and industry

T. Mocek; M. Divoky; M. Smrz; M. Sawicka; M. Chyla; P. Sikocinski; H. Vohnikova; P. Severova; A. Lucianetti; J. Novak; B. Rus

doi:10.1051/epjconf/20135908003

EPJ

a
b
c
d
e
ap
st
h
plus
ds
pv
ti
qt
am
n

Proceedings

Open Access

EPJ Web of Conferences 59, 08003 (2013)
https://doi.org/10.1051/epjconf/20135908003

Status of HiLASE project: High average power pulsed DPSSL systems for research and industry

T. Mocek¹, M. Divoky¹, M. Smrz¹, M. Sawicka¹, M. Chyla¹, P. Sikocinski¹, H. Vohnikova¹, P. Severova¹, A. Lucianetti¹, J. Novak² and B. Rus²

¹ HiLASE Project, Institute of Physics ASCR, Prague, Czech Republic
² ELI Beamlines Project, Institute of Physics ASCR, Prague, Czech Republic

Published online: 15 November 2013

Abstract

We introduce the Czech national R&D project HiLASE which focuses on strategic development of advanced high-repetition rate, diode pumped solid state laser (DPSSL) systems that may find use in research, high-tech industry and in the future European large-scale facilities such as HiPER and ELI. Within HiLASE we explore two major concepts: thin-disk and cryogenically cooled multislab amplifiers capable of delivering average output powers above 1 kW level in picosecond-to-nanosecond pulsed regime. In particular, we have started a programme of technology development to demonstrate the scalability of multislab concept up to the kJ level at repetition rate of 1–10 Hz.

© Owned by the authors, published by EDP Sciences, 2013

This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.