Test tasks for verification of program codes for calculation of neutron-physical characteristics of the BN series reactors
1 National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Department of Theoretical and Experimental Physics of Nuclear Reactors, 31, Kashirskoe Shosse, 115409, Moscow, Russia
2 Institute for Theoretical and Experimental Physics, Department of safe nuclear reactors, 25, Bolshaya Cheremushkinskaya ul., 117218, Moscow, Russia
a Corresponding author: firstname.lastname@example.org
Published online: 25 September 2017
System of test tasks is presented with the fast reactor BN-1200 with nitride fuel as prototype. The system of test tasks includes three test based on different geometric models. Model of fuel element in homogeneous and in heterogeneous form, model of fuel assembly in height-heterogeneous and full heterogeneous form, and modeling of the active core of BN-1200 reactor. Cross-verification of program codes was performed. Transition from simple geometry to more complex one allows to identify the causes of discrepancies in the results during the early stage of cross-verification of codes. This system of tests can be applied for certification of engineering programs based on the method of Monte Carlo to the calculation of full-scale models of the reactor core of the BN series. The developed tasks take into account the basic layout and structural features of the reactor BN-1200. They are intended for study of neutron-physical characteristics, estimation of influence of heterogeneous structure and influence of diffusion approximation. The development of system of test tasks allowed to perform independent testing of programs for calculation of neutron-physical characteristics: engineering programs JARFR and TRIGEX, and codes MCU, TDMCC, and MMK based on the method of Monte Carlo.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.