https://doi.org/10.1051/epjconf/202226401048
Optimization of the polishing process on a polishing machine with horizontal overarm
1
asphericon s.r.o., 463 12 Jeřmanice, Czechia
2
Technical university of Liberec, Institute of New Technologies and Applied Informatics, 461 17 Liberec, Czechia
3
Technical University of Liberec, Dept. of Power Engineering Equipment, 461 17 Liberec, Czechia
* Corresponding author: tomas.vit@tul.cz
Published online: 11 July 2022
Understanding the basic principles of polishing on machines with autorotating swing kinematics is important for the description and understanding of more advanced polishing technologies. The article deals with the theoretical and numerical analysis of the polishing process and its comparison with the experiment performed during the real process on the machine. The dependence of the mutual position of the tool and workpiece axes on the removal distribution within the polished surface was described and demonstrated
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
