EPJ ST Highlight - How can x-ray diffraction be used for a reliable study of nanostructured materials?

X-ray diffraction in a nanostructured material.

A new overview shows how x-ray diffraction can effectively measure lattice defects responsible for the unique properties of nanostructured materials – but special care is required for the application

Owing to their unique physical properties, nanostructured materials are now at the forefront of materials science. Several different techniques can be used to characterise their microscopic features, but each of these has its pros and cons. In new research published in EPJ ST, Jenő Gubicza at ELTE Eötvös Loránd University, Budapest, shows that one indirect method, named x-ray diffraction line profile analysis (XLPA) is suitable for analysing nanostructured materials, but its application and interpretation require special care for obtaining reliable conclusions.

Nanostructured materials consist of nanoscale grains, each composed of an orderly atomic lattice. Useful properties stem from abrupt changes to the arrangements of atoms in these lattices, named ‘defects’. To fine-tune a nanostructure’s material properties, researchers can control the density of these defects by an appropriate selection of the processing conditions of nanomaterials.

To compare the defect densities introduced by both of these approaches, XLPA measures how x-rays are diffracted by the microstructures contained in the materials as they pass through. The concern here is whether the information about defect structure obtained by XLPA is reliable, since this method studies the material indirectly only through the scattering of x-rays. Alternatively, transmission electron microscopy (TEM) can provide extensively detailed images of these microstructures, but can only be used to study tiny volumes.

In his analysis, Gubicza compares the microstructures determined indirectly through XLPA, with those obtained directly through TEM. On the one hand, he found that the defect densities determined by the two methods agree well. On the other, while the grain size measured by both techniques tend to diverge in materials with larger grain sizes, they largely agreed with each other for grain sizes smaller than 20 nanometres. In these cases, XLPA correctly showed that both top-down and bottom-up processing methods of nanomaterials can produce similarly high defect densities. Altogether, Gubicza’s overview provides researchers with useful guidance on how and when XLPA should be applied.

This was our first experience of publishing with EPJ Web of Conferences. We contacted the publisher in the middle of September, just one month prior to the Conference, but everything went through smoothly. We have had published MNPS Proceedings with different publishers in the past, and would like to tell that the EPJ Web of Conferences team was probably the best, very quick, helpful and interactive. Typically, we were getting responses from EPJ Web of Conferences team within less than an hour and have had help at every production stage.
We are very thankful to Solange Guenot, Web of Conferences Publishing Editor, and Isabelle Houlbert, Web of Conferences Production Editor, for their support. These ladies are top-level professionals, who made a great contribution to the success of this issue. We are fully satisfied with the publication of the Conference Proceedings and are looking forward to further cooperation. The publication was very fast, easy and of high quality. My colleagues and I strongly recommend EPJ Web of Conferences to anyone, who is interested in quick high-quality publication of conference proceedings.

On behalf of the Organizing and Program Committees and Editorial Team of MNPS-2019, Dr. Alexey B. Nadykto, Moscow State Technological University “STANKIN”, Moscow, Russia. EPJ Web of Conferences vol. 224 (2019)

ISSN: 2100-014X (Electronic Edition)

© EDP Sciences