EPJ ST Special Issue: Additive Manufacturing for Particle Accelerators
- Details
- Published on 01 March 2024
Guest Editors: Chuan Zhang and Michael Mayerhofer
Particle accelerators are essential tools for basic research and also have a wide range of important applications for energy, environment, healthcare, materials, security, etc. However, manufacturing complexity and cost are often limiting factors in developing new-type particle accelerators and increasing their usage. Additive manufacturing, which is revolutionizing our way to design and build things, could provide one promising solution to the dilemma. When additive manufacturing meets particle accelerators, the difficulties of the traditional technologies in manufacturing very complex structures e.g. advanced water-cooling channels can be easily overcome so that not only the construction time and cost of particle accelerators will be reduced considerably but also novel designs for better accelerator performance can be enabled.
This special issue is focusing on the applications of additive manufacturing technologies for R & D of modern particle accelerators and will cover but not be limited to the following topics:
- Adaptation and optimization of additive manufacturing methods for accelerator physics
- Novel accelerator concepts through the design freedom allowed by additive manufacturing
- Additive manufacturing for normal-conducting accelerators
- Additive manufacturing for superconducting accelerators
- Additive manufacturing for ion sources
- Additive manufacturing for magnets
- Additive manufacturing for storage rings
- Improvement of surface quality, vacuum performance and heat / electrical conductivity of additively manufactured accelerator components
- Post-analyses and -processing of additively manufactured accelerator components
- Powder production and recycling for additive manufacturing
You are heartily welcome to share your successful experience, learned lessons, and sparks of ideas with the whole accelerator community.
Articles should be submitted to the Editorial Office of EPJ ST via the submission system. They should be clearly identified as intended for the special issue "Additive Manufacturing for Particle Accelerators".
More detailed author information including paper types can be found in the Submission Guidelines. For the preparation of the manuscripts a special latex template (preferably single-column layout) is available here.
Guest Editors
PD Dr. Dr. Chuan Zhang, GSI Helmholtz Centre for Heavy Ion Research, Darmstadt; Goethe University Frankfurt & Helmholtz Research Academy Hesse for FAIR, Germany, This email address is being protected from spambots. You need JavaScript enabled to view it.
Dr. Michael Mayerhofer, Institute for Applied Physics and Measurement Technology, Universität der Bundeswehr München, Germany, This email address is being protected from spambots. You need JavaScript enabled to view it.
Open Access: If the CORRESPONDING author is affiliated to an institute that has an Open Access agreement with Springer, the OA publication - if verified - is paid by the agreement partner. All OA agreements are listed with more details here. Eligibility will be automatically verified when the corresponding author is requested to complete the relevant affiliation information after acceptance of the paper during the production process. Corresponding authors not affiliated to institutes with Open Access Agreements are redirected to proceed with “Please select your publishing model” and have to decide between paying the current Open Access fee - for details see How to publish with us | The European Physical Journal Special Topics (springer.com)and Open Choice programme) - or choosing the subscription option without any publication charges.
